{"title":"Exclusive | Anita Art Soul | Ann Pire","description":"","products":[{"product_id":"a-good-teacher-car-charm-sublimation-blank-and-transfer-exclusive","title":"A Good Teacher Car Charm Sublimation Blank | AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch4\u003eFinished Size | W 3.6\"  H 3.58\" \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e  \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e(MUST BE MIRRORED)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e(DO NOT MIRROR)\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e✔️ Single sided\u003c\/h4\u003e\n\u003ch4\u003e✔️ Comes with blank and transfer (string and bead not included)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut (i\u003cspan style=\"color: rgb(43, 0, 255);\"\u003ef this bothers you, you can spray paint the back of blanks before taking protective covering off. Let dry for at least 24 hours before pressing). \u003c\/span\u003e\n\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single | Blank with Transfer","offer_id":41771759403105,"sku":null,"price":2.75,"currency_code":"USD","in_stock":true},{"title":"Matte Single | Blank with Transfer","offer_id":41771759435873,"sku":null,"price":2.75,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single | Blank with Transfer","offer_id":42093681803361,"sku":null,"price":4.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/6939723D-9795-4B58-9380-A19D97EB4F14.jpg?v=1722528053"},{"product_id":"wonderfully-made-car-charm-sublimation-blank-and-transfer-exclusive","title":"Wonderfully Made Car Charm Sublimation Blank | AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch4\u003eFinished Size | W 3.45\"  H 3.5\"\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e  \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e(MUST BE MIRRORED)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e(DO NOT MIRROR)\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e✔️ Single sided\u003c\/h4\u003e\n\u003ch4\u003e✔️ Comes with blank and transfer (string and bead not included)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut (i\u003cspan style=\"color: rgb(43, 0, 255);\"\u003ef this bothers you, you can spray paint the back of blanks before taking protective covering off. Let dry for at least 24 hours before pressing). \u003c\/span\u003e\n\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single | Blank with Transfer","offer_id":41771771920481,"sku":null,"price":2.75,"currency_code":"USD","in_stock":true},{"title":"Matte Single | Blank with Transfer","offer_id":41771771953249,"sku":null,"price":2.75,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single | Blank with Transfer","offer_id":43229781622881,"sku":null,"price":4.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/D508295F-96BB-44B4-B889-675D6F875B73.jpg?v=1722558935"},{"product_id":"santas-favorite-administrator-badge-button-sublimation-blank-set-of-2","title":"Santa's Favorite Administrator Badge Button Sublimation Blank | Set of 2 AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e*BADGE REEL \/ VELCRO NOT INCLUDED AND MUST BE PURCHASED SEPARATELY*\u003c\/span\u003e  \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eI purchase my badge reels \u003ca rel=\"noopener\" href=\"https:\/\/www.specialistid.com\/collections\/badge-reels\/products\/translucent-badge-reel-with-swivel-clip\" target=\"_blank\"\u003eHERE.\u003c\/a\u003e\u003c\/strong\u003e  I use 1 inch velcro dots to adhere.\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eActual Size | W 1.7\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\"   H 1.7\"\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with 2 blanks and transfers only (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ebadge reel \/ velcro not included\u003c\/span\u003e)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Sided with Transfer","offer_id":42727484424289,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Sided with Transfer","offer_id":42727484457057,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single Sided with Transfer","offer_id":42727484489825,"sku":null,"price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/IMG_3383.png?v=1767650277"},{"product_id":"santas-counselor-badge-button-sublimation-blank-set-of-2","title":"Santa's Favorite Counselor Badge Button Sublimation Blank | Set of 2 AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e*BADGE REEL \/ VELCRO NOT INCLUDED AND MUST BE PURCHASED SEPARATELY*\u003c\/span\u003e  \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eI purchase my badge reels \u003ca rel=\"noopener\" href=\"https:\/\/www.specialistid.com\/collections\/badge-reels\/products\/translucent-badge-reel-with-swivel-clip\" target=\"_blank\"\u003eHERE.\u003c\/a\u003e\u003c\/strong\u003e  I use 1 inch velcro dots to adhere.\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eActual Size | W 1.7\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\"   H 1.7\"\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with 2 blanks and transfers only (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ebadge reel \/ velcro not included\u003c\/span\u003e)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Sided with Transfer","offer_id":42727484850273,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Sided with Transfer","offer_id":42727484883041,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single Sided with Transfer","offer_id":42727484915809,"sku":null,"price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/IMG_3395.png?v=1767650614"},{"product_id":"santas-daycare-provider-badge-button-sublimation-blank-set-of-2","title":"Santa's Favorite Daycare Provider Badge Button Sublimation Blank | Set of 2 AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e*BADGE REEL \/ VELCRO NOT INCLUDED AND MUST BE PURCHASED SEPARATELY*\u003c\/span\u003e  \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eI purchase my badge reels \u003ca rel=\"noopener\" href=\"https:\/\/www.specialistid.com\/collections\/badge-reels\/products\/translucent-badge-reel-with-swivel-clip\" target=\"_blank\"\u003eHERE.\u003c\/a\u003e\u003c\/strong\u003e  I use 1 inch velcro dots to adhere.\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eActual Size | W 1.7\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\"   H 1.7\"\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with 2 blanks and transfers only (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ebadge reel \/ velcro not included\u003c\/span\u003e)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Sided with Transfer","offer_id":42727484948577,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Sided with Transfer","offer_id":42727484981345,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single Sided with Transfer","offer_id":42727485014113,"sku":null,"price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/IMG_3397.png?v=1767650674"},{"product_id":"santas-dental-assistant-badge-button-sublimation-blank-set-of-2","title":"Santa's Favorite Dental Assistant Badge Button Sublimation Blank | Set of 2 AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e*BADGE REEL \/ VELCRO NOT INCLUDED AND MUST BE PURCHASED SEPARATELY*\u003c\/span\u003e  \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eI purchase my badge reels \u003ca rel=\"noopener\" href=\"https:\/\/www.specialistid.com\/collections\/badge-reels\/products\/translucent-badge-reel-with-swivel-clip\" target=\"_blank\"\u003eHERE.\u003c\/a\u003e\u003c\/strong\u003e  I use 1 inch velcro dots to adhere.\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eActual Size | W 1.7\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\"   H 1.7\"\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with 2 blanks and transfers only (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ebadge reel \/ velcro not included\u003c\/span\u003e)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Sided with Transfer","offer_id":42727485145185,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Sided with Transfer","offer_id":42727485177953,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single Sided with Transfer","offer_id":42727485210721,"sku":null,"price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/IMG_3427.png?v=1767651501"},{"product_id":"santas-future-cardiologist-badge-button-sublimation-blank-set-of-2","title":"Santa's Favorite Future Cardiologist Badge Button Sublimation Blank | Set of 2 AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e*BADGE REEL \/ VELCRO NOT INCLUDED AND MUST BE PURCHASED SEPARATELY*\u003c\/span\u003e  \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eI purchase my badge reels \u003ca rel=\"noopener\" href=\"https:\/\/www.specialistid.com\/collections\/badge-reels\/products\/translucent-badge-reel-with-swivel-clip\" target=\"_blank\"\u003eHERE.\u003c\/a\u003e\u003c\/strong\u003e  I use 1 inch velcro dots to adhere.\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eActual Size | W 1.7\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\"   H 1.7\"\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with 2 blanks and transfers only (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ebadge reel \/ velcro not included\u003c\/span\u003e)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Sided with Transfer","offer_id":42727485374561,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Sided with Transfer","offer_id":42727485407329,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single Sided with Transfer","offer_id":42727485440097,"sku":null,"price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/IMG_3421.png?v=1767651363"},{"product_id":"santas-guidance-counselor-badge-button-sublimation-blank-set-of-2","title":"Santa's Favorite Guidance Counselor Badge Button Sublimation Blank | Set of 2 AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e*BADGE REEL \/ VELCRO NOT INCLUDED AND MUST BE PURCHASED SEPARATELY*\u003c\/span\u003e  \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eI purchase my badge reels \u003ca rel=\"noopener\" href=\"https:\/\/www.specialistid.com\/collections\/badge-reels\/products\/translucent-badge-reel-with-swivel-clip\" target=\"_blank\"\u003eHERE.\u003c\/a\u003e\u003c\/strong\u003e  I use 1 inch velcro dots to adhere.\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eActual Size | W 1.7\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\"   H 1.7\"\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with 2 blanks and transfers only (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ebadge reel \/ velcro not included\u003c\/span\u003e)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Sided with Transfer","offer_id":42727485472865,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Sided with Transfer","offer_id":42727485505633,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single Sided with Transfer","offer_id":42727485538401,"sku":null,"price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/IMG_3410.png?v=1767651019"},{"product_id":"santas-hair-stylist-badge-button-sublimation-blank-set-of-2","title":"Santa's Favorite Hair Stylist Badge Button Sublimation Blank | Set of 2 AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e*BADGE REEL \/ VELCRO NOT INCLUDED AND MUST BE PURCHASED SEPARATELY*\u003c\/span\u003e  \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eI purchase my badge reels \u003ca rel=\"noopener\" href=\"https:\/\/www.specialistid.com\/collections\/badge-reels\/products\/translucent-badge-reel-with-swivel-clip\" target=\"_blank\"\u003eHERE.\u003c\/a\u003e\u003c\/strong\u003e  I use 1 inch velcro dots to adhere.\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eActual Size | W 1.7\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\"   H 1.7\"\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with 2 blanks and transfers only (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ebadge reel \/ velcro not included\u003c\/span\u003e)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Sided with Transfer","offer_id":42727485636705,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Sided with Transfer","offer_id":42727485669473,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single Sided with Transfer","offer_id":42727485702241,"sku":null,"price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/IMG_3425.png?v=1767651456"},{"product_id":"santas-lab-scientist-badge-button-sublimation-blank-set-of-2","title":"Santa's Favorite Lab Scientist Badge Button Sublimation Blank | Set of 2 AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e*BADGE REEL \/ VELCRO NOT INCLUDED AND MUST BE PURCHASED SEPARATELY*\u003c\/span\u003e  \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eI purchase my badge reels \u003ca rel=\"noopener\" href=\"https:\/\/www.specialistid.com\/collections\/badge-reels\/products\/translucent-badge-reel-with-swivel-clip\" target=\"_blank\"\u003eHERE.\u003c\/a\u003e\u003c\/strong\u003e  I use 1 inch velcro dots to adhere.\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eActual Size | W 1.7\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\"   H 1.7\"\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with 2 blanks and transfers only (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ebadge reel \/ velcro not included\u003c\/span\u003e)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Sided with Transfer","offer_id":42727485997153,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Sided with Transfer","offer_id":42727486029921,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single Sided with Transfer","offer_id":42727486062689,"sku":null,"price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/IMG_3413.png?v=1767651159"},{"product_id":"santas-lunch-lady-badge-button-sublimation-blank-set-of-2","title":"Santa's Favorite Lunch Lady Badge Button Sublimation Blank | Set of 2 AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e*BADGE REEL \/ VELCRO NOT INCLUDED AND MUST BE PURCHASED SEPARATELY*\u003c\/span\u003e  \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eI purchase my badge reels \u003ca rel=\"noopener\" href=\"https:\/\/www.specialistid.com\/collections\/badge-reels\/products\/translucent-badge-reel-with-swivel-clip\" target=\"_blank\"\u003eHERE.\u003c\/a\u003e\u003c\/strong\u003e  I use 1 inch velcro dots to adhere.\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eActual Size | W 1.7\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\"   H 1.7\"\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with 2 blanks and transfers only (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ebadge reel \/ velcro not included\u003c\/span\u003e)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Sided with Transfer","offer_id":42727486128225,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Sided with Transfer","offer_id":42727486160993,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single Sided with Transfer","offer_id":42727486193761,"sku":null,"price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/IMG_3433.png?v=1767651671"},{"product_id":"santas-mammography-tech-badge-button-sublimation-blank-set-of-2","title":"Santa's Favorite Mammography Tech  Badge Button Sublimation Blank | Set of 2 AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e*BADGE REEL \/ VELCRO NOT INCLUDED AND MUST BE PURCHASED SEPARATELY*\u003c\/span\u003e  \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eI purchase my badge reels \u003ca rel=\"noopener\" href=\"https:\/\/www.specialistid.com\/collections\/badge-reels\/products\/translucent-badge-reel-with-swivel-clip\" target=\"_blank\"\u003eHERE.\u003c\/a\u003e\u003c\/strong\u003e  I use 1 inch velcro dots to adhere.\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eActual Size | W 1.7\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\"   H 1.7\"\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with 2 blanks and transfers only (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ebadge reel \/ velcro not included\u003c\/span\u003e)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Sided with Transfer","offer_id":42727486259297,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Sided with Transfer","offer_id":42727486292065,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single Sided with Transfer","offer_id":42727486324833,"sku":null,"price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/IMG_3405.png?v=1767650889"},{"product_id":"santas-massage-therapist-badge-button-sublimation-blank-set-of-2","title":"Santa's Favorite Massage Therapist Badge Button Sublimation Blank | Set of 2 AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e*BADGE REEL \/ VELCRO NOT INCLUDED AND MUST BE PURCHASED SEPARATELY*\u003c\/span\u003e  \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eI purchase my badge reels \u003ca rel=\"noopener\" href=\"https:\/\/www.specialistid.com\/collections\/badge-reels\/products\/translucent-badge-reel-with-swivel-clip\" target=\"_blank\"\u003eHERE.\u003c\/a\u003e\u003c\/strong\u003e  I use 1 inch velcro dots to adhere.\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eActual Size | W 1.7\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\"   H 1.7\"\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with 2 blanks and transfers only (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ebadge reel \/ velcro not included\u003c\/span\u003e)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Sided with Transfer","offer_id":42727486357601,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Sided with Transfer","offer_id":42727486390369,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single Sided with Transfer","offer_id":42727486423137,"sku":null,"price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/IMG_3400.png?v=1767650734"},{"product_id":"santas-nurse-badge-button-sublimation-blank-set-of-2","title":"Santa's Favorite Nurse Badge Button Sublimation Blank | Set of 2 AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e*BADGE REEL \/ VELCRO NOT INCLUDED AND MUST BE PURCHASED SEPARATELY*\u003c\/span\u003e  \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eI purchase my badge reels \u003ca rel=\"noopener\" href=\"https:\/\/www.specialistid.com\/collections\/badge-reels\/products\/translucent-badge-reel-with-swivel-clip\" target=\"_blank\"\u003eHERE.\u003c\/a\u003e\u003c\/strong\u003e  I use 1 inch velcro dots to adhere.\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eActual Size | W 1.7\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\"   H 1.7\"\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with 2 blanks and transfers only (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ebadge reel \/ velcro not included\u003c\/span\u003e)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Sided with Transfer","offer_id":42727486718049,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Sided with Transfer","offer_id":42727486750817,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single Sided with Transfer","offer_id":42727486783585,"sku":null,"price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/IMG_3393.png?v=1767650546"},{"product_id":"santas-office-staff-button-sublimation-blank-set-of-2","title":"Santa's Favorite Office Staff Badge Button Sublimation Blank | Set of 2 AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e*BADGE REEL \/ VELCRO NOT INCLUDED AND MUST BE PURCHASED SEPARATELY*\u003c\/span\u003e  \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eI purchase my badge reels \u003ca rel=\"noopener\" href=\"https:\/\/www.specialistid.com\/collections\/badge-reels\/products\/translucent-badge-reel-with-swivel-clip\" target=\"_blank\"\u003eHERE.\u003c\/a\u003e\u003c\/strong\u003e  I use 1 inch velcro dots to adhere.\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eActual Size | W 1.7\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\"   H 1.7\"\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with 2 blanks and transfers only (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ebadge reel \/ velcro not included\u003c\/span\u003e)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Sided with Transfer","offer_id":42727487176801,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Sided with Transfer","offer_id":42727487209569,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single Sided with Transfer","offer_id":42727487242337,"sku":null,"price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/IMG_3430.png?v=1767651558"},{"product_id":"santas-postal-worker-button-sublimation-blank-set-of-2","title":"Santa's Favorite Postal Worker Badge Button Sublimation Blank | Set of 2 AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e*BADGE REEL \/ VELCRO NOT INCLUDED AND MUST BE PURCHASED SEPARATELY*\u003c\/span\u003e  \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eI purchase my badge reels \u003ca rel=\"noopener\" href=\"https:\/\/www.specialistid.com\/collections\/badge-reels\/products\/translucent-badge-reel-with-swivel-clip\" target=\"_blank\"\u003eHERE.\u003c\/a\u003e\u003c\/strong\u003e  I use 1 inch velcro dots to adhere.\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eActual Size | W 1.7\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\"   H 1.7\"\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with 2 blanks and transfers only (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ebadge reel \/ velcro not included\u003c\/span\u003e)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Sided with Transfer","offer_id":42727487340641,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Sided with Transfer","offer_id":42727487373409,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single Sided with Transfer","offer_id":42727487406177,"sku":null,"price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/IMG_3401.png?v=1767650785"},{"product_id":"santas-principal-button-sublimation-blank-set-of-2","title":"Santa's Favorite Principal Badge Button Sublimation Blank | Set of 2 AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e*BADGE REEL \/ VELCRO NOT INCLUDED AND MUST BE PURCHASED SEPARATELY*\u003c\/span\u003e  \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eI purchase my badge reels \u003ca rel=\"noopener\" href=\"https:\/\/www.specialistid.com\/collections\/badge-reels\/products\/translucent-badge-reel-with-swivel-clip\" target=\"_blank\"\u003eHERE.\u003c\/a\u003e\u003c\/strong\u003e  I use 1 inch velcro dots to adhere.\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eActual Size | W 1.7\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\"   H 1.7\"\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with 2 blanks and transfers only (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ebadge reel \/ velcro not included\u003c\/span\u003e)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Sided with Transfer","offer_id":42727487438945,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Sided with Transfer","offer_id":42727487471713,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single Sided with Transfer","offer_id":42727487504481,"sku":null,"price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/IMG_3415.png?v=1767651214"},{"product_id":"santas-radiation-therapist-badge-button-sublimation-blank-set-of-2","title":"Santa's Favorite Radiation Therapist Badge Button Sublimation Blank | Set of 2 AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e*BADGE REEL \/ VELCRO NOT INCLUDED AND MUST BE PURCHASED SEPARATELY*\u003c\/span\u003e  \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eI purchase my badge reels \u003ca rel=\"noopener\" href=\"https:\/\/www.specialistid.com\/collections\/badge-reels\/products\/translucent-badge-reel-with-swivel-clip\" target=\"_blank\"\u003eHERE.\u003c\/a\u003e\u003c\/strong\u003e  I use 1 inch velcro dots to adhere.\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eActual Size | W 1.7\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\"   H 1.7\"\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with 2 blanks and transfers only (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ebadge reel \/ velcro not included\u003c\/span\u003e)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Sided with Transfer","offer_id":42727487537249,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Sided with Transfer","offer_id":42727487570017,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single Sided with Transfer","offer_id":42727487602785,"sku":null,"price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/IMG_3407.png?v=1767650944"},{"product_id":"santas-realtor-badge-button-sublimation-blank-set-of-2","title":"Santa's Favorite Realtor Badge Button Sublimation Blank | Set of 2 AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e*BADGE REEL \/ VELCRO NOT INCLUDED AND MUST BE PURCHASED SEPARATELY*\u003c\/span\u003e  \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eI purchase my badge reels \u003ca rel=\"noopener\" href=\"https:\/\/www.specialistid.com\/collections\/badge-reels\/products\/translucent-badge-reel-with-swivel-clip\" target=\"_blank\"\u003eHERE.\u003c\/a\u003e\u003c\/strong\u003e  I use 1 inch velcro dots to adhere.\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eActual Size | W 1.7\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\"   H 1.7\"\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with 2 blanks and transfers only (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ebadge reel \/ velcro not included\u003c\/span\u003e)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Sided with Transfer","offer_id":42727487701089,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Sided with Transfer","offer_id":42727487733857,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single Sided with Transfer","offer_id":42727487766625,"sku":null,"price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/IMG_3417.png?v=1767651258"},{"product_id":"santas-social-worker-badge-button-sublimation-blank-set-of-2","title":"Santa's Favorite Social Worker Badge Button Sublimation Blank | Set of 2 AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e*BADGE REEL \/ VELCRO NOT INCLUDED AND MUST BE PURCHASED SEPARATELY*\u003c\/span\u003e  \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eI purchase my badge reels \u003ca rel=\"noopener\" href=\"https:\/\/www.specialistid.com\/collections\/badge-reels\/products\/translucent-badge-reel-with-swivel-clip\" target=\"_blank\"\u003eHERE.\u003c\/a\u003e\u003c\/strong\u003e  I use 1 inch velcro dots to adhere.\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eActual Size | W 1.7\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\"   H 1.7\"\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with 2 blanks and transfers only (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ebadge reel \/ velcro not included\u003c\/span\u003e)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Sided with Transfer","offer_id":42727487864929,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Sided with Transfer","offer_id":42727487897697,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single Sided with Transfer","offer_id":42727487930465,"sku":null,"price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/IMG_3432.png?v=1767651626"},{"product_id":"santas-sonogram-tech-badge-button-sublimation-blank-set-of-2","title":"Santa's Favorite Sonogram Tech Badge Button Sublimation Blank | Set of 2 AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e*BADGE REEL \/ VELCRO NOT INCLUDED AND MUST BE PURCHASED SEPARATELY*\u003c\/span\u003e  \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eI purchase my badge reels \u003ca rel=\"noopener\" href=\"https:\/\/www.specialistid.com\/collections\/badge-reels\/products\/translucent-badge-reel-with-swivel-clip\" target=\"_blank\"\u003eHERE.\u003c\/a\u003e\u003c\/strong\u003e  I use 1 inch velcro dots to adhere.\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eActual Size | W 1.7\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\"   H 1.7\"\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with 2 blanks and transfers only (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ebadge reel \/ velcro not included\u003c\/span\u003e)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Sided with Transfer","offer_id":42727487963233,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Sided with Transfer","offer_id":42727487996001,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single Sided with Transfer","offer_id":42727488028769,"sku":null,"price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/IMG_3403.png?v=1767650833"},{"product_id":"santas-teachers-assistant-badge-button-sublimation-blank-set-of-2","title":"Santa's Favorite  Teachers Assistant Badge Button Sublimation Blank | Set of 2 AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e*BADGE REEL \/ VELCRO NOT INCLUDED AND MUST BE PURCHASED SEPARATELY*\u003c\/span\u003e  \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eI purchase my badge reels \u003ca rel=\"noopener\" href=\"https:\/\/www.specialistid.com\/collections\/badge-reels\/products\/translucent-badge-reel-with-swivel-clip\" target=\"_blank\"\u003eHERE.\u003c\/a\u003e\u003c\/strong\u003e  I use 1 inch velcro dots to adhere.\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eActual Size | W 1.7\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\"   H 1.7\"\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with 2 blanks and transfers only (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ebadge reel \/ velcro not included\u003c\/span\u003e)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Sided with Transfer","offer_id":42727489142881,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Sided with Transfer","offer_id":42727489175649,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single Sided with Transfer","offer_id":42727489208417,"sku":null,"price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/IMG_3411.png?v=1767651096"},{"product_id":"santas-ultrasound-tech-badge-button-sublimation-blank-set-of-2","title":"Santa's Favorite Ultrasound Tech Badge Button Sublimation Blank | Set of 2 AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e*BADGE REEL \/ VELCRO NOT INCLUDED AND MUST BE PURCHASED SEPARATELY*\u003c\/span\u003e  \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eI purchase my badge reels \u003ca rel=\"noopener\" href=\"https:\/\/www.specialistid.com\/collections\/badge-reels\/products\/translucent-badge-reel-with-swivel-clip\" target=\"_blank\"\u003eHERE.\u003c\/a\u003e\u003c\/strong\u003e  I use 1 inch velcro dots to adhere.\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eActual Size | W 1.7\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\"   H 1.7\"\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with 2 blanks and transfers only (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ebadge reel \/ velcro not included\u003c\/span\u003e)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Sided with Transfer","offer_id":42727489241185,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Sided with Transfer","offer_id":42727489273953,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single Sided with Transfer","offer_id":42727489306721,"sku":null,"price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/IMG_3423.png?v=1767651407"},{"product_id":"santas-vet-tech-badge-button-sublimation-blank-set-of-2","title":"Santa's Favorite Vet Tech Badge Button Sublimation Blank | Set of 2 AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e*BADGE REEL \/ VELCRO NOT INCLUDED AND MUST BE PURCHASED SEPARATELY*\u003c\/span\u003e  \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eI purchase my badge reels \u003ca rel=\"noopener\" href=\"https:\/\/www.specialistid.com\/collections\/badge-reels\/products\/translucent-badge-reel-with-swivel-clip\" target=\"_blank\"\u003eHERE.\u003c\/a\u003e\u003c\/strong\u003e  I use 1 inch velcro dots to adhere.\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eActual Size | W 1.7\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\"   H 1.7\"\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with 2 blanks and transfers only (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ebadge reel \/ velcro not included\u003c\/span\u003e)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Sided with Transfer","offer_id":42727489339489,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Sided with Transfer","offer_id":42727489372257,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single Sided with Transfer","offer_id":42727489405025,"sku":null,"price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/IMG_3429.png?v=1767651727"},{"product_id":"santas-veterinarian-badge-button-sublimation-blank-set-of-2","title":"Santa's Favorite Veterinarian Badge Button Sublimation Blank | Set of 2 AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer that comes with purchase.\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e*BADGE REEL \/ VELCRO NOT INCLUDED AND MUST BE PURCHASED SEPARATELY*\u003c\/span\u003e  \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eI purchase my badge reels \u003ca rel=\"noopener\" href=\"https:\/\/www.specialistid.com\/collections\/badge-reels\/products\/translucent-badge-reel-with-swivel-clip\" target=\"_blank\"\u003eHERE.\u003c\/a\u003e\u003c\/strong\u003e  I use 1 inch velcro dots to adhere.\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eActual Size | W 1.7\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\"   H 1.7\"\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with 2 blanks and transfers only (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ebadge reel \/ velcro not included\u003c\/span\u003e)\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Sided with Transfer","offer_id":42727489470561,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Sided with Transfer","offer_id":42727489503329,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Single Sided with Transfer","offer_id":42727489536097,"sku":null,"price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/IMG_3419.png?v=1767651313"},{"product_id":"pray-every-day-magnet-sublimation-blank-kit","title":"Pray Every Day Magnet Sublimation Blank Kit | AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer included with purchase. \u003c\/h2\u003e\n\u003ch4\u003ePray Every Day\u003c\/h4\u003e\n\u003ch4\u003eFinished Size | W 2.75\"  H 2.75\"   \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with blank, transfer and 3M adhesive magnet\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e\n\u003cp\u003e62779129\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Transfer Kit","offer_id":43232862699617,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Transfer Kit","offer_id":43232862732385,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Transfer Kit","offer_id":43232862765153,"sku":null,"price":3.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/Pray.jpg?v=1770045107"},{"product_id":"give-me-jesus-magnet-sublimation-blank-kit","title":"Give Me Jesus Magnet Sublimation Blank Kit | AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer included with purchase. \u003c\/h2\u003e\n\u003ch4\u003eGive Me Jesus\u003c\/h4\u003e\n\u003ch4\u003eFinished Size | W 2.75\"  H 2.75\"   \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with blank, transfer and 3M adhesive magnet\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e\n\u003cp\u003e62091001\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Transfer Kit","offer_id":43232863158369,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Transfer Kit","offer_id":43232863191137,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Transfer Kit","offer_id":43232863223905,"sku":null,"price":3.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/Jesus.jpg?v=1770045079"},{"product_id":"god-made-mothers-magnet-sublimation-blank-kit","title":"God Made Mothers Magnet Sublimation Blank Kit | AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer included with purchase. \u003c\/h2\u003e\n\u003ch4\u003eGod Could Not Be Everywhere and Therefore He Made Mothers \u003c\/h4\u003e\n\u003ch4\u003eFinished Size | W 2.75\"  H 2.75\"   \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with blank, transfer and 3M adhesive magnet\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e\n\u003cp\u003e62975737\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Transfer Kit","offer_id":43232863453281,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Transfer Kit","offer_id":43232863486049,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Transfer Kit","offer_id":43232863518817,"sku":null,"price":3.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/mothers.jpg?v=1770045018"},{"product_id":"still-waters-magnet-sublimation-blank-kit","title":"Still Waters Magnet Sublimation Blank Kit | AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer included with purchase. \u003c\/h2\u003e\n\u003ch4\u003eHe Leads Me Beside Still Waters\u003c\/h4\u003e\n\u003ch4\u003eFinished Size | W 2.75\"  H 2.75\"   \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with blank, transfer and 3M adhesive magnet\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e\n\u003cp\u003e62713593\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Transfer Kit","offer_id":43232863617121,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Transfer Kit","offer_id":43232863649889,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Transfer Kit","offer_id":43232863682657,"sku":null,"price":3.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/waters.jpg?v=1770044811"},{"product_id":"house-that-built-me-magnet-sublimation-blank-kit","title":"House That Built Me Magnet Sublimation Blank Kit | AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer included with purchase. \u003c\/h2\u003e\n\u003ch4\u003eThe House That Built Me\u003c\/h4\u003e\n\u003ch4\u003eFinished Size | W 2.75\"  H 2.75\"   \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with blank, transfer and 3M adhesive magnet\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e\n\u003cp\u003e62942969\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Transfer Kit","offer_id":43232864567393,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Transfer Kit","offer_id":43232864600161,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Transfer Kit","offer_id":43232864632929,"sku":null,"price":3.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/house.jpg?v=1770044742"},{"product_id":"then-sings-my-soul-magnet-sublimation-blank-kit-aas","title":"Then Sings My Soul Magnet Sublimation Blank Kit | AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer included with purchase. \u003c\/h2\u003e\n\u003ch4\u003eThen Sings My Soul\u003c\/h4\u003e\n\u003ch4\u003eFinished Size | W 2.75\"  H 2.75\"   \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with blank, transfer and 3M adhesive magnet\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e\n\u003cp\u003e62058233\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Transfer Kit","offer_id":43232865222753,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Transfer Kit","offer_id":43232865255521,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Transfer Kit","offer_id":43232865288289,"sku":null,"price":3.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/soul.jpg?v=1770044706"},{"product_id":"you-will-be-blessed-magnet-sublimation-blank-kit-aas","title":"You Will Be Blessed Magnet Sublimation Blank Kit | AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer included with purchase. \u003c\/h2\u003e\n\u003ch4\u003eYou Will Be Blessed When You Come In Blessed When You Go Out\u003c\/h4\u003e\n\u003ch4\u003eFinished Size | W 2.75\"  H 2.75\"   \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with blank, transfer and 3M adhesive magnet\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e\n\u003cp\u003e62582521\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Transfer Kit","offer_id":43232865353825,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Transfer Kit","offer_id":43232865386593,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Transfer Kit","offer_id":43232865419361,"sku":null,"price":3.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/Blessed.jpg?v=1770044336"},{"product_id":"then-sings-my-soul-bluebird-magnet-sublimation-blank-kit-aas","title":"Then Sings My Soul Bluebird Magnet Sublimation Blank Kit | AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer included with purchase. \u003c\/h2\u003e\n\u003ch4\u003eThen Sings My Soul\u003c\/h4\u003e\n\u003ch4\u003eFinished Size | W 2.75\"  H 2.75\"   \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with blank, transfer and 3M adhesive magnet\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e\n\u003cp\u003e62910201\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Transfer Kit","offer_id":43232866205793,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Transfer Kit","offer_id":43232866238561,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Transfer Kit","offer_id":43232866271329,"sku":null,"price":3.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/bluebird.jpg?v=1770043829"},{"product_id":"bloom-where-you-are-planted-magnet-sublimation-blank-kit-aas","title":"Bloom Where You are Planted Magnet Sublimation Blank Kit | AAS","description":"\u003ch2\u003eThis unisub sublimation blank was created solely for using with the transfer included with purchase. \u003c\/h2\u003e\n\u003ch4\u003eBloom Where You Are Planted\u003c\/h4\u003e\n\u003ch4\u003eFinished Size | W 2.75\"  H 2.75\"   \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eMDF Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 2.8mm thick\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Unisub - \u003c\/strong\u003e\u003cstrong\u003eapprox. 4.6mm thick\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e✔️ Comes with blank, transfer and 3M adhesive magnet\u003c\/h4\u003e\n\u003ch4\u003e✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides)\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003e✔️\u003c\/strong\u003e Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub MDF:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove all the clear or blue film from the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove residue, if any, with a soft damp cloth from unisub MDF.\u003c\/li\u003e\n\u003cli\u003ePlace your MDF substrate onto your transfer and secure with heat tape.\u003c\/li\u003e\n\u003cli\u003ePress for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePRESSING INSTRUCTIONS for Unisub Acrylic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the clear film from both sides of the substrate.\u003c\/li\u003e\n\u003cli\u003ePlace your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. \u003c\/li\u003e\n\u003cli\u003ePress for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)\u003c\/li\u003e\n\u003cli\u003eImmediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eJoin the \u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/share\/g\/1GzBcJwWV9\/\" rel=\"noopener\" target=\"_blank\"\u003ePioneer Supplier and Creations VIP\u003c\/a\u003e\u003cspan\u003e on Facebook for new releases and sales!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlank Sublimation Unisub Acrylic and MDF, Ready to Sublimate\u003c\/p\u003e\n\u003cp\u003e62648057\u003c\/p\u003e","brand":"Pioneer Supplier \u0026 Creations","offers":[{"title":"Gloss Single Transfer Kit","offer_id":43409353048161,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Matte Single Transfer Kit","offer_id":43409353080929,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Transfer Kit","offer_id":43409353113697,"sku":null,"price":3.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/8361\/7889\/files\/FullSizeRender_99d27b8f-bfac-4870-a2bc-20e3cbb79044.jpg?v=1770195031"}],"url":"https:\/\/pioneersupplierandcreations.com\/collections\/exclusive-anita-art-soul-ann-pier.oembed?page=2","provider":"Pioneer Supplier \u0026 Creations","version":"1.0","type":"link"}