Diamond Square Sublimation Car Charm Blanks

MDF - Diamond Square Sublimation Car Charm Blanks

BLANKS FOR SUBLIMATION

Size - 4.123" x 4.11"

The blanks are approximately 1/8” thick. 

Choose between single sided or double sided. Choose a gloss or matte finish. 

The single sided gloss and matte finish have a brown backing. Our gloss finish will have a clear film. Our matte finish will have a blue film.

PRESSING INSTRUCTIONS:

1. Remove the clear or blue film from the substrate.
2. Remove residue, if any, with a soft damp cloth.
3. Place your MDF substrate onto your transfer and secure with heat tape.
4. Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)

Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate