Leo Car Charm Sublimation Blank
Couldn't load pickup availability
MDF Leo car charm sublimation blank for heat press
Unfinished MDF Blanks for Sublimation
These laser cut blanks double as car charms or ornaments.
Size - 4" and are approximately 1/8” thick MDF unisub hardboard
✔️ Single sided with brown backing
✔️ Gloss (clear film) or matte (blue film) finish
✔️ PNG template download upon order fulfillment
✔️ Backside of single sided car charms are unfinished and may have some burn marks around the edges due to the nature of being laser cut
✔️ Use caution when taking the plastic film off due fragile nature of some cuts.
Don't see what you are looking for? Contact us via our Facebook page or email us at pioneersupplierandcreations.com
PRESSING INSTRUCTIONS:
- Remove the clear or blue film from the substrate.
- Remove residue, if any, with a soft damp cloth.
- Place your MDF substrate onto your transfer and secure with heat tape.
- Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)
Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate
Pressing Instructions
Pressing Instructions
PRESSING INSTRUCTIONS:
1. Pre-press for 3-5 seconds
2. Place your substrate onto your transfer and secure with heat tape.
3. Press for 50-55 seconds @ 380 degrees medium to heavy pressure.
(Time and temp may vary based on your heat press)
Shipping
Shipping
Only ships within United States from Mississippi
