Skip to product information
1 of 10

US State Shaped Ornament Sublimation Blanks

Regular price $2.00 USD
Regular price Sale price $2.00 USD
Sale Sold out
Shipping calculated at checkout.
Side Option
State

MDF US State shaped ornament sublimation blanks for heat press

Arizona | Finished size W 3.58"  H 4.25" | Print Size W 3.66"  H 4.33"

Kentucky | Finished size W 5.25"  H 2.47" | Print Size W 3.66"  H 2.57"

Minnesota | Finished size W 3.71"  H 4.25" | Print Size W 3.81"  H 4.35"

North Dakota | Finished size W 5.31" H 3" | Print Size W 5.41"  H 3.1"

The blanks are approximately 1/8” thick.

Choose from single or double sided with a gloss finish. If you would like the matte finish, please leave a note when checking out. Matte is single sided only. 

The single sided gloss and matte finish have a brown backing. Our gloss finish will have a clear film. Our matte finish will have a blue film.

PRESSING INSTRUCTIONS:

  1. Remove the clear or blue film from the substrate.
  2. Remove residue, if any, with a soft damp cloth.
  3. Place your MDF substrate onto your transfer and secure with heat tape.
  4. Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)

Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate

Pressing Instructions

PRESSING INSTRUCTIONS:

1. Pre-press for 3-5 seconds 

2. Place your substrate onto your transfer and secure with heat tape.

3. Press for 50-55 seconds @ 380 degrees medium to heavy pressure.
(Time and temp may vary based on your heat press)

Shipping

Only ships within United States from Mississippi