A-Z Scalloped Initial Car Charm Sublimation Blank | Single Sided

This unisub sublimation blank was created solely for using with your own images or digital paper.

Finished Size | W 3.75"  H 4"   

MDF Unisub - approx. 2.8mm thick  (MIRRORED)

✔️ Single Sided | Double Sided found HERE

✔️ Gloss (green film) Matte (blue film) Double sided (clear film both sides)

✔️ Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut (if this bothers you, you can spray paint the back of blanks before taking protective covering off. Let dry for at least 24 hours before pressing). 

PRESSING INSTRUCTIONS for Unisub MDF:

1. Remove all the blue, clear or green film from the substrate.
2. Remove residue, if any, with a soft damp cloth.
3. Place your MDF substrate onto your transfer and secure with heat tape.
4. Press for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press

Join the Pioneer Supplier and Creations VIP on Facebook for new releases and sales!

Blank Sublimation Unisub MDF, Ready to Sublimate