Alabama Mardi Stars Earring Sublimation Blanks | Exclusive Pixel Pop

This unisub MDF sublimation blank was created solely for using with the image which can be found HERE

*DESIGN NOT INCLUDED* AND MUST BE PURCHASED SEPARATELY IF YOU DO NOT ORDER THE TRANSFER SET* 

Please send Pioneer a message or email if you need help with matching this design to our blank

Finished Size | W 1.11"  H 1.7" approx 2.8mm thick

Print Size | W 1.21"  H 1.8" | Print Same Sides

Click HERE to see all blanks for Pixel Pop

✔️  Sold as 1 pair (2 pcs) or in kits of 2 or 4 pair

✔️  Single sided 

✔️  Choose gloss or matte finish 

✔️ IMAGE MUST BE PURCHASED SEPARATELY IF YOU DO NOT ORDER THE TRANSFER SET

✔️ Hardware and Transfers included with KITS ONLY

✔️ PNG Template download emailed upon order fulfillment 

PRESSING INSTRUCTIONS:

1. Remove the clear or blue film from the substrate.
2. Remove residue, if any, with a soft damp cloth.
3. Place your MDF substrate onto your transfer and secure with heat tape.
4. Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)

Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate

Don't see what you are looking for? Contact us via our Facebook page or email us at pioneersupplierandcreations.com