MDF 2D Nativity Arabesque shaped sublimation blank ornaments for heat press

Unfinished MDF Blanks for Sublimation

Finished Top | W 3.39 H 4.5  Finished Back | W 3.39  H 4.5

Print Top | W 3.49  H 4.6   Print Back | W 3.49  H 4.6 

They are approximately 1/8” thick MDF unisub hardboard 

✔️ 2 pieces (attach front to back with glue Here)

✔️ Single sided

✔️ Gloss (clear film) or matte (blue film) finish

✔️ PNG template download upon order fulfillment 

✔️ Backside of single sided blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut

Don't see what you are looking for? Contact us via our Facebook page or email us at pioneersupplierandcreations.com

PRESSING INSTRUCTIONS:

1. Remove the clear or blue film from the substrate.
2. Remove residue, if any, with a soft damp cloth.
3. Place your MDF substrate onto your transfer and secure with heat tape.
4. Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)

Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate