Beanie Ornament Sublimation Blank

This sublimation blank was created to let your imagination flow. Use your own digital image or paper to make this blank unique

Hat Finished Size | W 3.75"  H 3.73"

Hat Print Size | W 3.85"  H 3.83" 

Name Plate Finished Size | W 3.61"  H 0.97"

Name Plate Print Size | W 3.71"  H 1.07" 

MDF Unisub - approx. 2.8mm thick  (MUST BE MIRRORED)

Acrylic Unisub - approx. 4.6mm thick (DO NOT MIRROR)

✔️ Gloss (clear film) Matte (blue film) Gloss Double (clear film both sides) 

✔️  Comes with 3M Tape to attach name plate

✔️ PNG Template download emailed upon order fulfillment 

✔️ Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut (if this bothers you, you can spray paint the back of blanks before taking protective covering off. Let dry for at least 24 hours before pressing). 

PRESSING INSTRUCTIONS for Unisub MDF:

1. Remove all the clear or blue film from the substrate.
2. Remove residue, if any, with a soft damp cloth from unisub MDF.
3. Place your MDF substrate onto your transfer and secure with heat tape.
4. Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press

Join the Pioneer Supplier and Creations VIP on Facebook for new releases and sales!

Blank Sublimation Unisub Acrylic and MDF, Ready to Sublimate