Blue and White Bunny Earring Sublimation Blanks | Exclusive Graphx & More

MDF Blue and White Bunny Earrings Heat Press Blanks

Unfinished Unisub MDF hardboard for Sublimation

*DESIGN NOT INCLUDED* AND MUST BE PURCHASED SEPARATELY IF YOU DO NOT ORDER THE TRANSFER SET* 

This unisub MDF sublimation blank was created solely for using with the image created by Graphx & More which can be found HERE

Finished Size | 1.16" W  1.65" H 

Template Print Size | 1.26" W  1.65" H  Print Opposite Sides

The blanks are approximately 2.8mm thick

Unisub MDF Hardwood

✔️ PNG Template download upon order fulfillment 

✔️ Design from Graphx & More

✔️ Proof of design purchase needed to receive image with bleed if you are having trouble lining image up with blank

PRESSING INSTRUCTIONS:

1. Remove the clear or blue film from the substrate.
2. Remove residue, if any, with a soft damp cloth.
3. Place your MDF substrate onto your transfer and secure with heat tape.
4. Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)

Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate

Don't see what you are looking for? Contact us via our Facebook page or email us at pioneersupplierandcreations.com