Bobber Keychain | Add-On Fish Sublimation Blanks

These sublimation blanks were created solely for using with the images created by Monogram Moments which can be found HERE

*DESIGN NOT INCLUDED* MUST BE PURCHASED SEPARATELY * 

Please send Pioneer a message or email us (pioneersupplierandcreations@gmail.com) if you need help matching this design to our blank

Bobber Finished Size |  W 2.18"  H 2.51"

Bobber Print Size | W 2.24"  H 2.56"

Fish Finished Size |  W 1.34"  H 0.61"

Fish Print Size | W 1.38"  H 0.65"

MDF Unisub - approx. 2.8mm thick  (MUST BE MIRRORED)

 ✔️ Comes with blank and hardware

✔️ Gloss (clear film) Matte (blue film) 

✔️ PNG Template download emailed upon order fulfillment 

✔️ Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut (if this bothers you, you can spray paint the back of blanks before taking protective covering off. Let dry for at least 24 hours before pressing). 

PRESSING INSTRUCTIONS for Unisub MDF:

1. Remove all the clear or blue film from the substrate.
2. Remove residue, if any, with a soft damp cloth from unisub MDF.
3. Place your MDF substrate onto your transfer and secure with heat tape.
4. Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press

Join the Pioneer Supplier and Creations VIP on Facebook for new releases and sales!

Blank Sublimation Unisub Acrylic and MDF, Ready to Sublimate