Boho School Doodle Keychain Sublimation Blank Kit

These sublimation blanks were created solely for using with the transfers included with your purchase.

Finished Size |  W 2.75"  H 2.52"

MDF Unisub - approx. 2.8mm thick  (MIRRORED)

✔️ You get blank, transfer and hardware

✔️ Gloss (green film) Matte (blue film) Double Sided (clear film both sides) 

✔️ Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. (if this bothers you, you can spray paint the back of blanks before taking protective covering off. Let dry for at least 24 hours before pressing). 

PRESSING INSTRUCTIONS for Unisub MDF:

1. Remove the blue, clear or green film from all sides of the substrate.
2. Remove residue, if any, with a soft damp cloth from unisub MDF.
3. Place your MDF substrate onto your transfer and secure with heat tape.
4. Press for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press

Join the Pioneer Supplier and Creations VIP on Facebook for new releases and sales!

Blank Sublimation Unisub MDF, Ready to Sublimate