Bunny Butt Truck Earring Sublimation Blanks | Exclusive Alicia Ray Art

This unisub MDF sublimation blank was created solely for using with the image created by Alicia Ray Art which can be found HERE

*DESIGN NOT INCLUDED* AND MUST BE PURCHASED SEPARATELY IF YOU DO NOT ORDER THE TRANSFER SET* 

** Please send Pioneer a message or email if you need help with matching this design to our blank**

Finished Size | W 1.18"  H 1.45" approx 2.8mm thick

Print Size | W 1.28"  H 1.55" | Print Same Sides

✔️  Choose single sided gloss or matte finish 

✔️  Sold as 1 pair (2 pcs) or in kits of 2 or 4 pair

✔️ Hardware and Transfers included with KITS ONLY

✔️ PNG Template download emailed upon order fulfillment 

✔️ IMAGE MUST BE PURCHASED SEPARATELY TO COMPLETE PROJECT IF YOU DO NOT ORDER THE TRANSFER SET

PRESSING INSTRUCTIONS:

1. Remove the clear or blue film from the substrate.
2. Remove residue, if any, with a soft damp cloth.
3. Place your MDF substrate onto your transfer and secure with heat tape.
4. Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)

Blank Sublimation Unisub MDF, Ready to Sublimate

Don't see what you are looking for? Contact us via our Facebook page or email us at pioneersupplierandcreations.com