Coffee Addicted To Me Badge Reel Sublimation Blanks | Set of 2 SD

This unisub sublimation blank was created solely for using with the transfer that comes with purchase.

*BADGE REEL / VELCRO NOT INCLUDED AND MUST BE PURCHASED SEPARATELY* 

I purchase my badge reels HERE.  I use 1 inch velcro dots to adhere.

Actual Size | W 1.65"   H 1.74"

MDF Unisub - approx. 2.8mm thick 

✔️ Comes with 2 blanks and transfers only (badge reel / velcro not included)

✔️ Gloss (clear film) Matte (blue film) 

✔️ Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. 

PRESSING INSTRUCTIONS for Unisub MDF:

1. Remove all the clear or blue film from the substrate.
2. Remove residue, if any, with a soft damp cloth from unisub MDF.
3. Place your MDF substrate onto your transfer and secure with heat tape.
4. Press for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press

Join the Pioneer Supplier and Creations VIP on Facebook for new releases and sales!

Blank Sublimation Unisub MDF, Ready to Sublimate