MDF Colorful Teal Polka dot Pumpkin Shaped Stud Earring Blanks

Unfinished Unisub MDF hardboard for Sublimation

*DESIGN NOT INCLUDED* **HARDWARE NOT INCLUDED**

Purchase this image sublimated onto blanks HERE

Purchase the design HERE

Click HERE to see all blanks for Pixel Pops

Finished Size | W 

Print Size | W 

The blanks are approximately 2.8mm thick

✔️  Sold as 1 pair (2 pcs)

✔️  Single sided only

✔️  Choose a gloss or matte finish - dark hardboard back

✔️  Hardware purchased separately at your local craft store or online

✔️ PNG Template download upon order fulfillment 

The single sided gloss and matte finish have a brown backing. Our gloss finish will have a clear film. Our matte finish will have a blue film.

PRESSING INSTRUCTIONS:

1. Remove the clear or blue film from the substrate.
2. Remove residue, if any, with a soft damp cloth.
3. Place your MDF substrate onto your transfer and secure with heat tape.
4. Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)
5. Let cool completely before applying a small dab of glue on back. 
6. Place post and let dry for 6-8 hours

Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate