Custom 5in Acrylic Ornament Sublimation Blank

This sublimation blank was created to let your imagination flow. Use your own digital image or paper to make this blank unique.

Finished Size |  W 5"  H "

Acrylic Unisub - approx. 4.6mm thick (DO NOT MIRROR)

✔️ Acrylic (clear film both sides)

PRESSING INSTRUCTIONS for Unisub Acrylic:

1. Remove the clear film from both sides of the substrate.
2. Place your acrylic substrate onto your transfer and secure (white side against transfer). I use 3m repositional spray so I do not end up with tape indentions on acrylic. 
3. Press for 120 seconds @ 355 degrees medium pressure. (Time and temp may vary based on your heat press)
4. Immediately remove and apply heavy even pressure on a smooth flat surface to cool so it will not warp. Make sure all surfaces are clean of grit (all will cause indents on substrate)
   

Join the Pioneer Supplier and Creations VIP on Facebook for new releases and sales!

Blank Sublimation Unisub Acrylic and MDF, Ready to Sublimate