Little Light of Mine Sublimation Blank | Exclusive Pixel Pops

This unisub MDF sublimation blank was created solely for using with the image created by Pixel Pops which can be found HERE 

*DESIGN NOT INCLUDED* AND MUST BE PURCHASED SEPARATELY * 

** Please send Pioneer a message or email if you need help with matching this design to our blank**

Click HERE to see all blanks for Pixel Pop

Finished Size | W 3.31"  H 4"

Bleed Print Size | W 4.43"  H 4.12" 

The blanks are approximately 2.8mm thick 

Unisub MDF Hardwood

✔️  Choose gloss or matte finish 

✔️  Choose single or double sided (matte is single sided only)

✔️  PNG Template download upon order fulfillment 

✔️  Design from Pixel Pop

PRESSING INSTRUCTIONS:

1. Remove the clear or blue film from the substrate.
2. Remove residue, if any, with a soft damp cloth.
3. Place your MDF substrate onto your transfer and secure with heat tape.
4. Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)

Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate

Don't see what you are looking for? Contact us via our Facebook page or email us at pioneersupplierandcreations.com