Heart Ornament Sublimation Blank

MDF Heart Ornament 

BLANKS FOR SUBLIMATION

Actual - 3.75” x 3.41"

Print Bleed - 3.85" x 3.51"

The blanks are approximately 1/8” thick.

Choose from single or double sided. Choose a gloss or matte finish. Matte finish comes in single sided only.

The single sided gloss and matte finish have a brown backing. Our gloss finish will have a clear film. Our matte finish will have a blue film.

PRESSING INSTRUCTIONS:

1. Remove the clear or blue film from the substrate.
2. Remove residue, if any, with a soft damp cloth.
3. Place your MDF substrate onto your transfer and secure with heat tape.
4. Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)

Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate