Clover | Shamrock Shaped Earring Sublimation Blanks

These sublimation blanks were created to let your imagination flow. Use your own digital paper to make these earrings come to life. 

Finished Size | W 1.4"  H 1.5"   Approximately 2.8mm thick

Bleed Print Size | W 1.45"  H 1.56" | Print Opposite Sides

MDF Unisub - approx. 2.8mm thick  (MUST BE MIRRORED)

✔️ Gloss (clear film) Matte (blue film) 

✔️ PNG Template download emailed upon order fulfillment 

✔️ Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. 

PRESSING INSTRUCTIONS for Unisub MDF:

1. Remove all the clear or blue film from the substrate.
2. Remove residue, if any, with a soft damp cloth from unisub MDF.
3. Place your MDF substrate onto your transfer and secure with heat tape.
4. Press for 55-60 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press

Join the Pioneer Supplier and Creations VIP on Facebook for new releases and sales!

Blank Sublimation Unisub Acrylic and MDF, Ready to Sublimate