Mom Sublimation Fridge Magnet Blank

MDF Mom Sublimation Fridge Magnet Blank for Heat Press

Actual Size - 3.25" x 2.5"

Bleed Print Size - 3.32" x 2.57"

BLANKS FOR SUBLIMATION

MAGNET WITH ADHESIVE INCLUDED

SINGLE SIDED ONLY

The blanks are approximately 1/8” thick.

Choose a gloss or matte finish.

The single sided gloss and matte finish have a brown backing. Our gloss finish will have a clear film. Our matte finish will have a blue film.

PRESSING INSTRUCTIONS:

1. Remove the clear or blue film from the substrate.
2. Remove residue, if any, with a soft damp cloth.
3. Place your MDF substrate onto your transfer and secure with heat tape.
4. Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)
5. Once cooled, peel adhesive from magnet and apply to back of MDF substrate

Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate