Mrs. Rudolph Stud Sublimation - No Hardware

This unisub MDF sublimation blank was created solely for using with the image created by TexasGasDigDesigns which can be found HERE

*DESIGN NOT INCLUDED* MUST BE PURCHASED SEPARATELY * 

Actual Size | W .54x H .64  approx 1/8" thick

Print Size | W .56"  H  0.67" | Print Equal Sides

✔️  Sold as 1 pair (2 pcs)

✔️  .6mm stud or smaller will work

✔️  Single sided only

✔️  Choose a gloss or matte finish - dark hardboard back

✔️  Hardware purchased separately at your local craft store or online

✔️ PNG Image Template download upon order fulfillment 

✔️ Decorate with sublimation transfers, fabric paint, heat transfer vinyl

No hardware is included with studs. It can be purchased at your craft store.

The single sided gloss and matte finish have a brown backing. Our gloss finish will have a clear film. Our matte finish will have a blue film.

PRESSING INSTRUCTIONS:

1. Remove the clear or blue film from the substrate.
2. Remove residue, if any, with a soft damp cloth.
3. Place your MDF substrate onto your transfer and secure with heat tape.
4. Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)

Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate