Santa Gnome Stud Sublimation - No Hardware

This unisub MDF sublimation blank was created solely for using with the image created by GoGo My Print which can be found HERE 

*DESIGN NOT INCLUDED AND MUST BE PURCHASED SEPARATELY * 

** Please send Pioneer a message or email if you need help with matching this design to our blank**

Click HERE to see all blanks for GoGo My Print

Print Size | W 1.4"  H  0.77"

Thickness - 1/8" 

✔️  Sold as 1 pair (2 pcs)

✔️  .6mm stud or smaller will work

✔️  Single sided only

✔️  Choose a gloss or matte finish - dark hardboard back

✔️  Hardware purchased separately at your local craft store or online

✔️ PNG Template download upon order fulfillment 

✔️ Decorate with sublimation transfers, fabric paint, heat transfer vinyl

No hardware is included with studs. It can be purchased at  your craft store.

The single sided gloss and matte finish have a brown backing. Our gloss finish will have a clear film. Our matte finish will have a blue film.

PRESSING INSTRUCTIONS:

1. Remove the clear or blue film from the substrate.
2. Remove residue, if any, with a soft damp cloth.
3. Place your MDF substrate onto your transfer and secure with heat tape.
4. Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)

Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate