School Spirit Bow Earring Sublimation Blanks | ARA

This unisub sublimation blank was created solely for using with the image created by Alicia Ray Art which can be found HERE

*DESIGN NOT INCLUDED* AND MUST BE PURCHASED SEPARATELY*

** Please send Pioneer a message or email if you need help with matching this design to our blank**

Finished Size | W 1.46"  H 1.5" approx 2.8mm thick

Print Size | W 1.5"  H 1.54" | Print Same Sides

MDF Unisub - approx. 2.8mm thick 

✔️  Comes with blank only (hardware not included)

✔️  Sold as single pairs

✔️  Single sided

✔️ Gloss (clear film) Matte (blue film) 

✔️ Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. 

PRESSING INSTRUCTIONS for Unisub MDF:

1. Remove all the clear or blue film from the substrate.
2. Remove residue, if any, with a soft damp cloth from unisub MDF.
3. Place your MDF substrate onto your transfer and secure with heat tape.
4. Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press

Join the Pioneer Supplier and Creations VIP on Facebook for new releases and sales!

Blank Sublimation Unisub MDF, Ready to Sublimation