School Spirit Bow Earring Sublimation Blanks

This unisub sublimation blank was created solely for using with the image created by Alicia Ray Art which can be found HERE

*DESIGN NOT INCLUDED* AND MUST BE PURCHASED SEPARATELY*

** Please send Pioneer a message or email if you need help with matching this design to our blank**

Finished Size | W 1.46"  H 1.5" approx 2.8mm thick

Print Size | W 1.5"  H 1.54" | Print Same Sides

MDF Unisub - approx. 2.8mm thick  (MUST BE MIRRORED)

✔️ Gloss (clear film) Matte (blue film) 

✔️ PNG Template download emailed upon order fulfillment 

✔️ Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut. 

PRESSING INSTRUCTIONS for Unisub MDF:

1. Remove all the clear or blue film from the substrate.
2. Remove residue, if any, with a soft damp cloth from unisub MDF.
3. Place your MDF substrate onto your transfer and secure with heat tape.
4. Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press