Sea Turtle Stud Sublimation Blanks - No Hardware
Sea Turtle Stud Sublimation Blanks - No Hardware
Regular price
$0.50 USD
Regular price
Sale price
$0.50 USD
Unit price
/
per
$0.50
MDF Sea Turtle Shaped Stud Earring Blanks
Unfinished Unisub MDF hardboard for Sublimation
*DESIGN NOT INCLUDED* **HARDWARE NOT INCLUDED**
Purchase this image sublimated onto blanks HERE
Purchase the design HERE
Click HERE to see all blanks for Pixel Pops
Finished Size | W
Print Size | W
The blanks are approximately 2.8mm thick
✔️ Sold as 1 pair (2 pcs)
✔️ Single sided only
✔️ Choose a gloss or matte finish - dark hardboard back
✔️ Hardware purchased separately at your local craft store or online
✔️ PNG Template download upon order fulfillment
The single sided gloss and matte finish have a brown backing. Our gloss finish will have a clear film. Our matte finish will have a blue film.
PRESSING INSTRUCTIONS:
- Remove the clear or blue film from the substrate.
- Remove residue, if any, with a soft damp cloth.
- Place your MDF substrate onto your transfer and secure with heat tape.
- Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)
- Let cool completely before applying a small dab of glue on back.
- Place post and let dry for 6-8 hours
Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate