Sticky Note Pad Sublimation Blank

MDF Sticky Note Holder Sublimation Blank for heat press

Actual Size | 4.16" W  5.07" H

Bleed Print Size | 4.26" W  5.17" H

Single Sided Only (back piece is 1/8" birch Plywood

(Glue needed to adhere the 2 pieces)

Approximately 1/8” thick. 

Single sided coated for sublimation with a brown backing. Choose between a gloss finish (clear film) or matte finish (blue film).” 

PRESSING INSTRUCTIONS:

1. Remove the clear or blue film from the substrate.
2. Remove residue, if any, with a soft damp cloth
3. Place your transfer face down and MDF substrate face up. Secure with heat tape
4. Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)

Blank Sublimation Unisub, Hardboard, MDF,  Ready to Sublimate