Stocking Green Toile Earring Sublimation Blanks | Exclusive Craft Corner

This unisub MDF sublimation blank was created solely for using with the image which can be found HERE

*DIGITAL DESIGN NOT INCLUDED WITH PURCHASE AND MUST BE PURCHASED SEPARATELY IF TRANSFER OPTION IS NOT SELECTED* 

** Please send Pioneer a message or email if you need help with matching this design to our blank**

Click HERE to purchase the completed earrings (Xanadu Originals)

Click HERE to see all blanks for Craft Corner 

Finished Size | W 0.91"  H 1.6" approx 2.8mm thick

Print Size | W 1.01"  H 1.7" | Print Opposite Sides

✔️  Sold as 1 pair (2 pcs) or in kits of 2 or 4 pair

✔️  Single sided 

✔️  Choose gloss or matte finish 

✔️ IMAGE MUST BE PURCHASED SEPARATELY IF YOU DO NOT ORDER THE TRANSFER SET

✔️ Hardware and Transfers included with KITS ONLY

✔️ PNG Template download emailed upon order fulfillment 

PRESSING INSTRUCTIONS:

1. Remove the clear or blue film from the substrate.
2. Remove residue, if any, with a soft damp cloth.
3. Place your MDF substrate onto your transfer and secure with heat tape.
4. Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on your heat press)

Blank Sublimation Unisub, Hardboard, MDF, Ready to Sublimate

Don't see what you are looking for? Contact us via our Facebook page or email us at pioneersupplierandcreations.com